SOLID FORGED ROTOR

A one piece solid forged rotor means no chance of internal parts separation. Our rotors also have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.

DIFFERENT COIL VOLTAGES AVAILABLE

Although 12 volt is the most common, 24 volts can also be made available. Depending upon the quantity, other specialty voltages can be made.

HIGH TEMPERATURE, LONGER LIFE GREASE

All models include our special long life grease which has shown a significant improvement in life over other standard high temp greases.

E-COATING

Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.

HIGH TEMPERATURE EPOXY COIL

To help prevent failure from both vibration and outside contaminants, all coils are sealed in the coil shell with a high temperature epoxy coating.

FORGED MACHINED PULLEY

All models in this section use a heavy duty machined pulley. A stronger pulley resists damage due to abusive environments. All models include our special long life grease which has shown a significant improvement in life over other standard high temp greases.


Click display to add or subtract column categories

Click on column heading to sort table by category

Wgt
(lbs)
PIC PDF DXF 3D
11.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
120.00 picture icon Download PDF DXF DXF
120.00 picture icon Download PDF DXF DXF
120.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
120.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
15.00 picture icon Download PDF DXF DXF
15.00 picture icon Download PDF DXF DXF
25.00 picture icon Download PDF DXF DXF
25.00 picture icon Download PDF DXF DXF
25.00 picture icon Download PDF DXF DXF
25.00 picture icon Download PDF DXF DXF
25.00 picture icon Download PDF DXF DXF
25.00 picture icon Download PDF DXF DXF
25.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
60.00 picture icon Download PDF DXF DXF
60.00 picture icon Download PDF DXF DXF
60.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
6.00 picture icon Download PDF DXF DXF
6.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
7.00 picture icon Download PDF DXF
7.00 picture icon Download PDF DXF DXF
8.00 picture icon Download PDF DXF DXF
9.00 picture icon Download PDF DXF
9.00 picture icon Download PDF DXF DXF
9.00 picture icon Download PDF DXF DXF
9.00 picture icon Download PDF DXF DXF
9.00 picture icon Download PDF DXF DXF
9.00 picture icon Download PDF DXF DXF
9.00 picture icon Download PDF DXF DXF
11.00 picture icon Download PDF DXF
11.00 picture icon Download PDF DXF
9.00 picture icon Download PDF DXF
9.00 picture icon Download PDF DXF
0.00 picture icon Download PDF DXF
11.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF
0.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF
0.00 picture icon Download PDF DXF
0.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
0.00 picture icon Download PDF DXF DXF
9.00 picture icon DXF
8.00 picture icon Download PDF DXF DXF
7.00 picture icon Download PDF DXF DXF
9.00 picture icon Download PDF DXF DXF
7.00 picture icon Download PDF DXF DXF
9.00 picture icon Download PDF DXF DXF
8.00 picture icon Download PDF DXF
8.00 picture icon Download PDF DXF
9.00 picture icon Download PDF DXF

*Taper is standard automotive 1" : 4" ratio. Gauge line diameter is .841." Weight is approximate.

In non-taper bore clutches, square keys are used. Actual keyway height shown is less.