MP Electromagnetic Clutch/Brake
(Torque Range: 4~443in-lbs / 0.5~50Nm)
Clutch/brake units are designed for extremely fast response, high cycles applications. Because of a special no gap armature design, there is no need to adjust for wear. Units are self adjusting and there is a consistent time to speed and time to stop. Low inertia components and low voltage fields allow for very fast response time. Small units are designed with finned housings to provide superior cooling. Additional friction materials like ceramics can be used to significantly increase overall cycle life.
Application Stories
Troubleshooting Videos
Applications
Packaging
Food Processing
Machine Tools
Office Machinary
Models and Dimensions
Click on column heading to sort table by category
| Model No. |
Ogura P/N |
Static Torque (ft-lbs) |
max RPM |
Bore (inch) |
Volts/ Watts |
Keyway | Wgt (lbs) |
PIC | DXF | 3D | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MP-5 | 23215300 | 0.367 | 2000 | 6mm shaft | 0.76/3.8 | 2mm width | 1.20 |
|
|
|
|
| MP-10 | 23208400 | 0.741 | 2000 | 8mm shaft | 1.06/5.3 | 2.5mm width | 2.00 |
|
|
|
|
| MP-20 | 23215400 | 1.5 | 2000 | 10mm shaft | 1.4/7 | 4mm width | 3.30 |
|
|
|
|
| MP-250 | 23215800 | 18.5 | 1000 | 20mm shaft | 5/25 | 5mm width | 17.60 |
|
|
|
|
| MP-40 | 23215500 | 3 | 1500 | 12mm shaft | 1.66/8.3 | 4mm width | 4.60 |
|
|
|
|
| MP-500 | 23215900 | 37 | 1000 | 25mm shaft | 5/30 | 7mm width | 33.00 |
|
|
|
|
| MP-80 | 23215600 | 6 | 1500 | 15mm shaft | 2.4/12 | 5mm width | 6.40 |
|
|
|
|
| MP-120 | 23215700 | 9 | 1500 | 15mm shaft | 5/15 | 5mm width | 11.00 |
|
|
|
|