SIMPLE INSTALLATION

Since the majority of Ogura clutches are one piece designs that come in pre-set, there are no adjustments to make either at the mower manufacturer or with the end user.

SOLID FORGED ROTOR

A one-piece solid forged rotor means no chance of internal parts separation. Our rotors also have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.

DIFFERENT COIL VOLTAGES AVAILABLE

Although 12 volt is the most common, 24 volts can also be made available. Depending upon the quantity, other specialty voltages can be made.

HIGH TEMPERATURE LONGER LIFE GREASE

All models include our special longer life grease that has shown a significant improvement in life over other standard high temperature greases.

E-COATING

Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.

HIGH TEMPERATURE EPOXY COIL

To help prevent failure from both vibration and outside contaminants, all coils are sealed in the coil shell with a high temperature epoxy coating.


Click display to add or subtract column categories

Click on column heading to sort table by category

Ogura
P/N
Static
Torque
(ft-lbs)
max
RPM
Bore
(inch)
Volts/
Watts
Output
Pulley (P)
Hub (H)
Other (O)
Ref.
Pitch
Dia.
(inch)
#
Grooves
Wgt
(lbs)
PIC PDF DXF 3D
514068 110 3600 1 12/50 P 4.66 1/A 12.00 picture icon Download PDF DXF
520356 110 3600 1 12/50 P 5.52 1/A 10.00 picture icon Download PDF DXF DXF
512585 110 3600 1 12/50 P 5.31 1/A 11.00 picture icon Download PDF DXF
513090 110 3600 1.125 12/50 P 5.31 1/A 11.00 picture icon Download PDF DXF
513711 110 3600 1 12/50 P 4.07 2/A 11.00 picture icon Download PDF DXF
522665 110 3600 1 12/50 P 6.25 1/B 12.00 picture icon Download PDF DXF
522229 110 3600 1.125 12/50 P 4.85 2/A 12.00 picture icon Download PDF DXF
520165 110 3600 1.125 12/50 P 3.85 2/A 12.00 picture icon Download PDF DXF
522829 110 3600 1 12/50 H 3.78 UnivMt 12.00 picture icon Download PDF DXF
523064 110 3600 1.125 12/50 P 3.85 2/A 12.00 picture icon Download PDF DXF
526296 110 3600 1 12/50 P 4.65 1/A 11.00 picture icon Download PDF DXF
523163 110 3600 1 12/50 P 4.65 1/A 10.00 picture icon Download PDF DXF DXF
527444 110 3600 1 12/50 P 4.65 1/A 12.00 picture icon Download PDF DXF
521788 110 3600 1 12/50 P 5.35 1/B 11.00 picture icon Download PDF DXF
528333 110 3600 1 12/50 P 5.25 1/AB 0.00 picture icon Download PDF DXF
528330 110 3600 1 12/50 P 5.50 1/AB 0.00 picture icon Download PDF DXF DXF
529544 110 3600 1.125 12/50 P 4.65 1/A 0.00 picture icon Download PDF DXF
527504 110 3600 1.125 12/50 P 5.25 1/A 0.00 picture icon DXF
527514 110 3600 1 12/50 P 4.68 1/A 0.00 picture icon DXF
528463 110 3600 1 12/50 P 5.25 1/A 0.00 picture icon DXF
533765 110 3600 1.125 12/50 P 5.25 1/AB 0.00 picture icon Download PDF DXF
534467 110 3600 1 12/50 H 4.09 UnivMt 0.00 picture icon Download PDF DXF
535402 110 3600 1.125 12/50 P 6.90 1/B 0.00 picture icon Download PDF DXF DXF
535436 110 3600 1 12/50 4.65 1/A 0.00 picture icon Download PDF DXF DXF
535439 110 3600 1 12/50 4.65 1/A 0.00 picture icon Download PDF DXF DXF
535444 110 3600 1 12/50 P 5.25 1/A 0.00 picture icon Download PDF DXF
537682 110 3600 12/45 P 6.43 1 0.00 picture icon Download PDF DXF
538370 110 3600 1 12/45 P 4.80 1 0.00 picture icon Download PDF DXF
538359 110 3600 1 12/45 p 4.80 1 0.00 picture icon Download PDF DXF
535955 110 3600 1.125 12/45 P 0.00 1 0.00 picture icon Download PDF DXF
535945 110 3600 1 12/45 P 0.00 1 0.00 picture icon Download PDF DXF
535938 110 3600 1 12/45 p 4.80 1 0.00 picture icon Download PDF DXF
537976 110 3600 1 12/45 P 6.43 1 0.00 picture icon Download PDF DXF
538627 110 3600 1.125 12/45 P 5.40 1 0.00 picture icon Download PDF DXF
537880 110 3600 1 12/45 P 5.40 1 0.00 picture icon Download PDF DXF
538652 110 3600 1 12/45 P 5.40 1 0.00 picture icon Download PDF DXF
538456 110 3600 1 12/45 P 5.40 1 0.00 picture icon Download PDF DXF
534627 110 3600 1.125 12/50 P 5.40 1 0.00 picture icon
536812 110 3600 1.125 12/50 P 5.40 1 0.00 DXF
520646 110 3600 1 12/50 P 5.12 1 0.00
505161 150 3600 25mm 12/40 H 3.78 UnivMt 11.50 picture icon Download PDF DXF
526157 150 3600 1 12/60 P 5.37 1/B 11.00 picture icon Download PDF DXF DXF
526102 150 3600 1.125 12/60 P 5.37 1/B 11.00 picture icon Download PDF DXF DXF
526238 150 3600 1 12/50 P 5.37 1/B 11.00 picture icon Download PDF DXF
525944 150 3600 1.125 12/50 P 5.37 1/B 11.00 picture icon Download PDF DXF
526115 150 3600 1.125 12/60 P 5.75 1/B 11.00 picture icon Download PDF DXF DXF
532470 150 3600 1.125 12/60 P 4.75 2/3V 0.00 picture icon DXF
532473 150 3600 1.125 12/60 P 4.75 2/3V 0.00 picture icon DXF
538512 200 3600 1.125 12/60 P 5.40 1 0.00 picture icon Download PDF DXF
537753 200 3600 1.125 12/60 P 5.40 1 0.00 picture icon
514086 250 3600 1.4375 12/50 H 3.78 UnivMt 16.00 picture icon Download PDF DXF DXF
528005 250 3600 1.4375 12/68 P 4.56 3/A 17.00 picture icon Download PDF DXF DXF
525930 250 3600 1.4375 12/68 P 4.56 3/B 20.00 picture icon Download PDF DXF DXF
526105 300 3600 1.125 12/68 P 5.37 1/B 15.00 picture icon Download PDF DXF DXF
525957 300 3600 1.125 12/68 P 5.37 1/B 15.00 picture icon Download PDF DXF DXF
526638 300 3600 1 12/68 P 5.32 1/B 15.00 picture icon Download PDF DXF
526986 300 3600 1.125 12/68 P 5.74 1/B 15.00 picture icon Download PDF DXF
528449 300 3600 1.125 12/68 P 6.12 1/B 0.00 picture icon DXF
528389 300 3600 1.125 12/68 P 6.12 1/B 0.00 picture icon Download PDF DXF DXF
534692 300 3600 1.125 12/68 H 0.00 n/A 0.00 picture icon DXF DXF
535690 300 3600 1.125 12/68 P 6.12 1/B 0.00 picture icon Download PDF DXF DXF
535725 300 3600 1.125 12/68 6.12 1/B 0.00 picture icon Download PDF DXF DXF
537427 300 3600 1.125 12/68 P 4.71 2 0.00
526232 400 3600 1.125 12/68 P 5.37 1/B 18.00 picture icon Download PDF DXF DXF
527825 400 3600 1.4375 12/68 P 4.55 3/A 18.00 picture icon Download PDF DXF DXF
533697 400 3600 1.4375 12/68 P 6.29 2/B 0.00 picture icon Download PDF DXF