CUSTOM MOLDED GEAR

The MIC assembly includes a custom-molded gear or timing pulley designed to your specifications.

ONE PIECE ASSEMBLY

The entire assembly is delivered pre-assembled, so it simply slides onto the shaft. There are no adjustments to make or gaps to set.

BI-DIRECTIONAL OPERATION

The clutch has the ability to drive clockwise or counterclockwise.

PERMANENT MAGNET RETURN

All standard units come with a permanent magnet armature return attached to the inside of the gear. This provides a fast and smooth disengagement of the armature when power is released to the clutch coil.

ZERO BACKLASH

If needed the armature can incorporate a one-piece spring that eliminates backlash.

LONG LIFE

Special bushings allow for millions of operating cycles for most applications.

D-CUT BORE

The bore of the clutch is made to fit a D-cut shaft to simplify installation and eliminate the need for set screws.

TWO CLUTCH POWER CONNECTION OPTIONS AVAILABLE

MIC clutches can come complete with a lead wire and a customer's specified terminal or the standard connector built into the clutch coil housing.


Click display to add or subtract column categories

Click on column heading to sort table by category

Model
No.
Ogura
P/N
Static
Torque
(ft-lbs)
max
RPM
Bore
(inch)
Volts/
Watts
Keyway Wgt
(lbs)
PIC PDF DXF
MIC-5 0 0.367 300 8mm 24/3.7 D-cut 0.20 picture icon Download PDF
MIC-8 0 0.591 300 8mm 24/3.7 D-cut 0.26 picture icon Download PDF
MIC-2.5 0 0.183 300 6mm 24/3.4 D-cut 0.11 picture icon Download PDF
MIC-2.5T 0 0.183 300 6mm 24/3.4 D-cut 0.07 picture icon Download PDF
MIC-3.5T 0 0.25 300 6mm 24/3.7 D-cut 0.07 picture icon Download PDF
MIC-5T 0 0.591 300 6mm 24/3.7 D-cut 0.13 picture icon Download PDF
© 2015 Ogura Industrial Corp. All rights reserved.
The contents of this website are protected under US copyright laws.
This site has been issued a certificate of registration by the United States copyright office, registration # TX 6-426-894

Ogura Industrial Corp. 100 Randolph Road • Somerset, New Jersey 08873
Phone: 732-271-7361 • Fax: 732-271-7580 • info@ogura-clutch.com


Home  |   About  |   What's New  |   Quick Selection Tool  |   Search  |   Careers  |   Contact