AUTOMATIC ADJUSTMENT FOR WEAR

The CT clutches include a patented adjusting mechanism for the armature that not only gives a constant adjustment for wear, but also produces a constant air gap on return. This gives a consistent armature engagement time over the life of the unit which is critical in some cycling applications.

STAINLESS STEEL HUB

Stainless steel hubs break up residual magnetism (flux) at the hub, preventing the magnetism from being transmitted into the shaft. Stainless steel also has superior corrosion resistance which helps eliminate potential corrosion between the armature and the hub.

EXCELLENT HEAT DISSIPATION

The design of flutes in the armature helps to dissipate the heat generated by friction on engagement.

HEAVY DUTY STANDARD DESIGN

Armature to hub connection is via heavy duty spine.

SMOOTH, QUITE OPERATION

Chattering noise between armature and hub spline is eliminated due to patented armature design which includes a rubber dampener to produce smooth, quiet operation.


Click display to add or subtract column categories

Click on column heading to sort table by category

Model
No.
Ogura
P/N
Static
Torque
(ft-lbs)
max
RPM
Bore
(inch)
Volts/
Watts
Keyway Wgt
(lbs)
PIC PDF DXF 3D
CT-20 0 22 4500 1/2, 5/8, 3/4, 7/8 90V, 28V, 24V, 6V Standard 9.20 picture icon Download PDF
CT-50 0 50 4000 1-1/8, 1-1/4, G bush 90V, 24V, 6V Standard 14.62 picture icon Download PDF
CT-100 0 100 3600 H bushing 90V, 6V Standard 26.02 picture icon Download PDF
CT-150 0 150 3600 H bushing 90V, 6V Standard 44.20 picture icon Download PDF
© 2016 Ogura Industrial Corp. All rights reserved.
The contents of this website are protected under US copyright laws.
This site has been issued a certificate of registration by the United States copyright office, registration # TX 6-426-894

Ogura Industrial Corp. 100 Randolph Road • Somerset, New Jersey 08873
Phone: 732-271-7361 • Fax: 732-271-7580 • info@ogura-clutch.com


Home  |   About  |   What's New  |   Quick Selection Tool  |   Search  |   Careers  |   Contact