ACCURATE AND DEPENDABLE TORQUE

Torque is transmitted via a hysteresis field resulting in consistent torque over time. Units are unaffected by friction and wear, therefore, torque is substantially more accurate and repeatable than friction tensioners.

ADJUSTABLE TORQUE GAIN

Each unit torque setting may be manually adjusted over a wide range providing torque ramp flexibility.

NO ELECTRICAL POWER NEEDED

The PET series clutches and brakes operate on a permanent magnet principle. External electrical connection is not required, therefore, units function independently from power fluctuation.

NO CONTAMINATION

Units are sealed to protect against contamination from equipment. There are also no wear particles from operation to contaminate equipment.

TORQUE PROPORTIONAL TO SPEED

Unlike centrifugal clutches that use friction surfaces, there are no sudden changes in torque. The torque that is generated is proportional to the change in rpm, giving a smooth acceleration.

LONG LIFE

There is virtually no wear because permanent magnets and hysteresis disks transmit the torque by magnetic flux without physical contact.

SIMPLE INSTALLATION

Units are provided bearing mounted and pre-assembled.

VERTICAL AND HORIZONTAL OPERATION POSSIBLE

Units can be mounted in any axis and can be run either clockwise or counterclockwise without affecting performance.

RESISTANT TO TEMPERATURE VARIATION

Rare earth magnets are employed in the design, which develop high torque while remaining unsusceptible to temperature variation.


Click display to add or subtract column categories

Click on column heading to sort table by category

Model
No.
Ogura
P/N
Static
Torque
(ft-lbs)
max
RPM
Bore
(inch)
Volts/
Watts
Keyway Wgt
(lbs)
PIC PDF DXF 3D
PET-1.2 0 0.000015 1800 6mm 0/0 Set screw 0.66 picture icon Download PDF
PET-2.5 0 0.000037 1800 6mm 0/0 Set screw 1.25 picture icon Download PDF
PET-5 0 0.000037 1800 8mm 0/0 3x9.4mm 1.85 picture icon Download PDF
PET-10 0 0.00011 1800 15mm 0/0 5x17.3mm 3.52 picture icon Download PDF

Torque as shown refers to minimum torque gain in in. lbs.. For actual torque gain refer to pdf file.

© 2016 Ogura Industrial Corp. All rights reserved.
The contents of this website are protected under US copyright laws.
This site has been issued a certificate of registration by the United States copyright office, registration # TX 6-426-894

Ogura Industrial Corp. 100 Randolph Road • Somerset, New Jersey 08873
Phone: 732-271-7361 • Fax: 732-271-7580 • info@ogura-clutch.com


Home  |   About  |   What's New  |   Quick Selection Tool  |   Search  |   Careers  |   Contact