Electromagnetic General Purpose Clutches
for Gas and Diesel Engine Driven Components
Ogura general purpose clutches are bearing mounted. The field is supported by a bearing on the shaft. Clutches are available in one piece and two piece designs.
Ogura general purpose electric clutches provide reliable performance for long life applications. These clutches are designed to mount directly on a gas or diesel engine. They are used in many outdoor power equipment applications, such as stump grinders, pump jacks, fans, and straw blowers or in salt & sand spreaders. Ogura general purpose electromagnetic clutches can handle almost all direct engine mount clutch requirements in the 5 horsepower to 40 horsepower load range. They are also ideally suited for outdoor applications in the agricultural, construction equipment, oil and gas field and power generation markets. Designed to transfer rotary motion directly from an engine, Ogura clutches feature standard crankshaft bore sizes and torque ratings to handle a variety of engines. A wide selection of forged machined pulleys or universal mounting output hubs provide a variety of connection options.
Featuring a solid forged rotor, high temp/long life bearings and e-coat corrosion protection, Ogura general purpose clutches can tackle the most demanding applications.
Models and Dimensions
Click on column heading to sort table by category
Ogura P/N |
Static Torque (ft-lbs) |
max RPM |
Bore (inch) |
Volts/ Watts |
Output Pulley (P) Hub (H) Other (O) |
Ref. Pitch Dia. (inch) |
# Grooves |
Wgt (lbs) |
PIC | DXF | 3D | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
538332 | 400 | 3600 | 1.438 | 12/68 | P | 4.69 | 3 | 0.00 | ||||
538649 | 110 | 3600 | 1 | 12/45 | P | 3.90 | 1 | 0.00 | ||||
538567 | 110 | 3600 | 1 | 12/45 | H | 4.49 | UnivMt | 0.00 | ||||
535528 | 400 | 3600 | 1.125 | 12/68 | P | 4.24 | 3/B | 18.00 | ||||
535411 | 110 | 3600 | 1 | 12/46.6 | H | 3.62 | UnivMt | 10.00 | ||||
532747 | 400 | 3600 | 1.25 | 12/68 | H | 0.00 | N/A | 0.00 | ||||
521325 | 250 | 3600 | 1.125 | 12/50 | P | 4.65 | 2/A | 16.00 | ||||
509044 | 250 | 3600 | 1.4375 | 12/50 | P | 4.65 | 2/A | 16.00 | ||||
519225 | 250 | 3600 | 1.125 | 12/50 | H | 3.90 | UnivMt | 16.00 | ||||
516849 | 250 | 3600 | 1 | 12/50 | P | 4.65 | 2/A | 16.00 | ||||
515294 | 110 | 3600 | 25mm | 12/47 | P | 4.07 | 2/3V | 12.00 | ||||
509812 | 110 | 3600 | 1 | 12/50 | P | 4.13 | 2/A | 10.00 | ||||
515609 | 110 | 3600 | 1 | 12/47 | H | 3.62 | UnivMt | 10.00 | ||||
505894 | 110 | 3600 | *Taper | 12/50 | H | 2.75 | UnivMt | 11.00 |