ACCURATE AND DEPENDABLE TORQUESince torque is transmitted via a hysteresis field, there is minimal difference between the static and the dynamic torque. These units are unaffected by friction and wear, therefore torque is substantially more accurate and repeatable than friction tensioners.
CONSTANT TORQUE (ADJUSTABLE)Units can deliver set torque regardless of speed range. Each unit's torque settings may be manually adjusted over a wide range providing great flexibility.
STABLE TORQUEA consistent torque is maintained regardless of allowable slip speed due to the hysteresis principle.
SIMPLE INSTALLATIONUnits are provided bearing mounted and pre-assembled.
LONG LIFEThere is virtually no wear because permanent magnets and hysteresis discs transmit the torque by magnetic flux without physical contact.
NO CONTAMINATIONUnits are sealed to protect against contamination from equipment. There are also no wear particles from operation to contaminate equipment.
NO ELECTRICAL POWER NEEDEDThe PHT series clutches and brakes operate on a permanent magnet priciple. External electrical connection is not required, therefore, units function independently from power fluctuation.
VERTICAL AND HORIZONTAL OPERATION
Units can be mounted in any axis and can be run either clockwise or counter-clockwise without affecting performance.
Click display to add or subtract column categories
Click on column heading to sort table by category
|PHT-0.02S||25293000||0.0025||10000||3mm shaft||0/0||D shaft||0.13|
|PHT-0.02D||25384800||0.0025||3600||5mm shaft||0/0||D shaft||0.11|
|PHT-0.05S||25297000||0.0052||10000||3mm shaft||0/0||D shaft||0.19|
|PHT-0.05D||25388100||0.0052||3600||5mm shaft||0/0||D shaft||0.12|
|PHT-0.5S||25297100||0.041||1800||6mm shaft||0/0||D shaft||0.19|
|PHT-0.5D||25386400||0.041||3600||8mm shaft||0/0||D shaft||0.32|
Only maximum torque is listed above. Check pdf file for actual torque range.