FAST RESPONSE

The torque of H series electromagnetic hysteresis clutches and brakes is independent of slip speed. Torque is directly proportionate to coil current, thus the torque of each unit can be adjusted by varying the current. Once the current is stable, the torque remains constant.

LONG LIFE

The H series produces drag torque without physical contact (friction) of parts and are not subject to wear (except the normal wear of antifriction bearings).

REPEATABILITY

The H series will always duplicate performance under identical operating conditions.

SMOOTH OPERATION

The H series does not utilize mechanical friction, therefore operation is smooth at any slip speed.

EASY MOUNTING

Mounting is effortless - no adjustments to make, no gaps to set. The H series may be mounted in the horizontal or vertical position.


Click display to add or subtract column categories

Click on column heading to sort table by category

Model
No.
Ogura
P/N
Static
Torque
(ft-lbs)
max
RPM
Bore
(inch)
Volts/
Watts
Keyway Wgt
(lbs)
PIC PDF DXF 3D
HC-1.2 25091300 0.091 3000 Shaft 12mm (in), 6mm 24/11 D shaft 1.50 picture icon Download PDF DXF
HC-2.5 25091400 0.183 3000 Shaft 14mm (in), 7mm 24/15 D shaft 2.20 picture icon Download PDF DXF
HC-5 25091500 0.367 3000 Shaft 16mm (in), 8mm 24/17 D shaft 3.70 picture icon Download PDF DXF
HC-10 25091600 0.741 3000 Shaft 18mm (in), 10m 24/21 D shaft 8.80 picture icon Download PDF DXF
HC-0.5 25361200 0.0367 3000 Shaft 10mm (in), 5mm 24/11 D-Shaft 1.00 picture icon Download PDF DXF
© 2016 Ogura Industrial Corp. All rights reserved.
The contents of this website are protected under US copyright laws.
This site has been issued a certificate of registration by the United States copyright office, registration # TX 6-426-894

Ogura Industrial Corp. 100 Randolph Road • Somerset, New Jersey 08873
Phone: 732-271-7361 • Fax: 732-271-7580 • info@ogura-clutch.com


Home  |   About  |   What's New  |   Quick Selection Tool  |   Search  |   Careers  |   Contact