SOLID FORGED ROTOR

A one piece solid forged rotor means no chance of internal parts separation. Our rotors also have an even wall thickness around the coil which gives optimum flux distribution, maximizing torque.

DIFFERENT COIL VOLTAGES AVAILABLE

Although 12 volt is the most common, 24 volts can also be made available. Depending upon the quantity, other specialty voltages can be made.

HIGH TEMPERATURE, LONGER LIFE GREASE

All models include our special long life grease which has shown a significant improvement in life over other standard high temp greases.

E-COATING

Where possible, all parts in the clutch are e-coated to give maximum corrosion protection.

HIGH TEMPERATURE EPOXY COIL

To help prevent failure from both vibration and outside contaminants, all coils are sealed in the coil shell with a high temperature epoxy coating.

FORGED MACHINED PULLEY

All models in this section use a heavy duty machined pulley. A stronger pulley resists damage due to abusive environments.


Click display to add or subtract column categories

Click on column heading to sort table by category

Ogura
P/N
Static
Torque
(ft-lbs)
max
RPM
Bore
(inch)
Volts/
Watts
Output
Pulley (P)
Hub (H)
Other (O)
Ref.
Pitch
Dia.
(inch)
#
Grooves
Wgt
(lbs)
PIC PDF DXF 3D
505894 110 3600 *Taper 12/50 H 2.75 UnivMt 11.00 picture icon Download PDF DXF DXF
515609 110 3600 1 12/47 H 3.62 UnivMt 10.00 picture icon Download PDF DXF DXF
535411 110 3600 1 12/46.6 H 3.62 UnivMt 10.00 picture icon Download PDF DXF DXF
519225 250 3600 1.125 12/50 H 3.90 UnivMt 16.00 picture icon Download PDF DXF DXF
525569 250 3600 1.25 12/50 H 3.90 UnivMt 16.00 picture icon Download PDF DXF
515294 110 3600 25mm 12/47 P 4.07 2/3V 12.00 picture icon Download PDF DXF DXF
509812 110 3600 1 12/50 P 4.13 2/A 10.00 picture icon Download PDF DXF DXF
516849 250 3600 1 12/50 P 4.65 2/A 16.00 picture icon Download PDF DXF DXF
509044 250 3600 1.4375 12/50 P 4.65 2/A 16.00 picture icon Download PDF DXF DXF
521325 250 3600 1.125 12/50 P 4.65 2/A 16.00 picture icon Download PDF DXF DXF
© 2016 Ogura Industrial Corp. All rights reserved.
The contents of this website are protected under US copyright laws.
This site has been issued a certificate of registration by the United States copyright office, registration # TX 6-426-894

Ogura Industrial Corp. 100 Randolph Road • Somerset, New Jersey 08873
Phone: 732-271-7361 • Fax: 732-271-7580 • info@ogura-clutch.com


Home  |   About  |   What's New  |   Quick Selection Tool  |   Search  |   Careers  |   Contact