HIGH TORQUE RATE - COMPACT DESIGN

The MD series are designed to produce very high torque in an overall compact design. Torque is produced via multiple disks condensing overall clutch size.

QUICK RELEASE TIME

Separator springs between the friction plates allow for quick disconnect when the power is released. These springs also keep the disks from making contact with each other in the disengaged mode.

FAST TORQUE BUILD UP
Because of limited internal movement and via multiple disk, clutch torque can be generated very quickly.

EASILY CONNECT TO YOUR GEAR, PULLEY OR COUPLING
The MD series is made to be used with the UN drive cup, the cup slides between the friction disk tangs and has a tapped bolt pattern so you can attach your bearing mounted gear pulley.

NOTE:
Wet type multiple disc electromagnetic clutch brake (Model MW) is also available. Electrical features and dimensions are the same as dry type (Model MD).


Click display to add or subtract column categories

Click on column heading to sort table by category

Model
No.
Ogura
P/N
Static
Torque
(ft-lbs)
max
RPM
Bore
(inch)
Volts/
Watts
Keyway Wgt
(lbs)
PIC PDF DXF 3D
UN-2.5 23157100 N/A 0.49 picture icon Download PDF DXF
UN-1.2 23157000 N/A 0.33 picture icon Download PDF DXF
UN-10 23157300 N/A 1.10 picture icon Download PDF
UN-5 23157200 N/A 0.77 picture icon Download PDF
UN-80 23169000 N/A 6.60 picture icon Download PDF
UN-40 23168900 N/A 4.60 picture icon Download PDF
UN-20 23157400 N/A 2.40 picture icon Download PDF
UN-160 23169100 N/A 16.00 picture icon Download PDF
UN-250 23169200 N/A 21.00 picture icon Download PDF
UN-320 23169300 N/A 30.00 picture icon Download PDF
UN-450 23549800 N/A 44.00 picture icon Download PDF
UN-600 23549900 N/A 55.00 picture icon Download PDF
MDC-1.2 23162900 12 1400 20mm 24/12 6x1.7 1.40 picture icon Download PDF DXF
MDC-2.5 23163000 26 1200 25mm 24/17 8x1.7 4.40 picture icon Download PDF DXF
MDC-5 23163100 50 1000 30mm 24/22 8x2 6.60 picture icon Download PDF DXF DXF
MDC-10 23163200 104 850 40mm 24/36 12x2.5 10.56 picture icon Download PDF DXF DXF
MDC-20 23163300 208 700 50mm 24/45 14x2.5 17.00 picture icon Download PDF DXF DXF
MDC-40 23058900 413 550 60mm 24/50 18x3 34.00 picture icon Download PDF DXF DXF
MDC-80 23059500 825 450 70mm 24/60 20x5 70.00 picture icon Download PDF DXF DXF
MDC-160 23060100 1651 400 90mm 24/90 25x5 123.00 picture icon Download PDF DXF DXF
MDC-250 23175300 2580 350 100mm 24/110 28x6.5 174.00 picture icon Download PDF DXF DXF
MDC-320 23132100 3300 300 110mm 24/125 28x9 229.00 picture icon Download PDF DXF DXF
MDC-450 23549600 4645 250 120mm 24/175 32x10 308.00 picture icon Download PDF DXF DXF
MDC-600 23549700 6195 200 140mm 24/150 35x11 422.00 picture icon Download PDF DXF DXF
© 2016 Ogura Industrial Corp. All rights reserved.
The contents of this website are protected under US copyright laws.
This site has been issued a certificate of registration by the United States copyright office, registration # TX 6-426-894

Ogura Industrial Corp. 100 Randolph Road • Somerset, New Jersey 08873
Phone: 732-271-7361 • Fax: 732-271-7580 • info@ogura-clutch.com


Home  |   About  |   What's New  |   Quick Selection Tool  |   Search  |   Careers  |   Contact