March 2009

Ogura has produced a new model of an electromagnetic brake. The new model is called MCB5. The new brake delivers the same amount of torque 4.5 in. lb. as the previous AMB5 but does so at a 20% smaller diameter and a 24% smaller overall width. The new brake comes standard with a 24 volt coil but other coil voltages are available. Standard speed capability is 3600 RPM but higher speeds are possible. The brake uses a zero back lash spring armature so there is no rattle noise when the brake is disengaged. The bore in the hub/armature comes standard with a key way and 2 set screws. The small light weight brake is RoHS compliant and is ideally suited for both industrial and automotive requirements.

These clutches are only a small part of over 3,000 different clutch models that Ogura has available. If this clutch does not meet your needs please contact us at 732-271-7361 and we will assist you in finding one that does or if you prefer, please visit us on our website at www.ogura-clutch.com for immediate information. Ogura Industrial Corporation, Somerset, NJ.

© 2016 Ogura Industrial Corp. All rights reserved.
The contents of this website are protected under US copyright laws.
This site has been issued a certificate of registration by the United States copyright office, registration # TX 6-426-894

Ogura Industrial Corp. 100 Randolph Road • Somerset, New Jersey 08873
Phone: 732-271-7361 • Fax: 732-271-7580 • info@ogura-clutch.com


Home  |   About  |   What's New  |   Quick Selection Tool  |   Search  |   Careers  |   Contact